Home | About Us | Certificates | Catalog | Solution | Contact Us | Quality Control  
Stamped parts
Die casted parts
Lathe machined parts
Deep drawn parts
Milled Parts
Die Spun Parts
Electroplated parts
Power coated parts
Plastic injected parts
Sheet metal stamping
Metal welding
Moulds building
Metal extruding
Aluminum die casting
Metal Machining
Metal finishing
Metal bending
Plastic injection molding


Copper is one of the soft materials in the stamping, the die material can be common tool material like Cr12 or T8 ect. In the punching process, the material under press the size will be large a little bit that effect the tollerances. The lower limits of tolerances must be considered in the die design. As well, we have a lot of experience on the sheet flaten measurements. Our designed die always properly fit the prints, satisfy our customer's needs and wants.

Because copper has good conductivity, so our customers use it as heatsinks, joints, contacts, terminals, connectors, nuts, washers ect.

Bass and copper also have good resistance for friction, a lot of our bearing bushes and fall arrest brakes are made from these material.


CopyRight©2020 湖南龙励电气有限公司 湘ICP备19002922号-1 91430121399123079L